craigslist | skilled trades/artisan jobs in boise

autobody tech (boise)

2009-12-18T14:28:52-07:00

need body guy if you can weld ,spread bondo sand ,spray primer and show up to work 5 days a week call bill 208 407 7317

Dish Technician (Boise )

2009-12-17T13:10:35-07:00

Looking for an experienced Dish Technician to take care of a few jobs we have. This job would be perfect for a part time position or a technician who needs supplemental work to the work you already have. Call me. Great Company, Great Pay.
801-705-9696

Industrial Journeymen Electrician (Vernal, UT)

2009-12-17T12:16:19-07:00

Need 6 Journeymen Electricians with a license from one of the following states: Alaska, Arkansas, Colorado, Idaho, Minnesota, Montana, Nebraska, New Hampshire, New Mexico, North Dakota, Oklahoma, Oregon, South Dakota, or Wyoming

Heavy Industrial Experience

Experience needed to include,

Lots of Rigid work

Cable tray

PLC cabinet

Read Prints

LOTS OF OVERTIME! Working 60 to 72 hours per week.

Pay is $20 per hour, $30 for OT per hour. $72.25 daily per-diem.

Must be able to pass drug test.

Job is near Vernal, UT and will start next week and go thru at least the end of April.

Email me ASAP or call Dave at 520-331-3131

Crane Operator

2009-12-16T16:49:12-07:00
Looking for a temporary Crane Operator. Applicants must have a minimum of 3-5 years of successful Crane Operator experience with NCCO certification. If you are qualified please send your resume to rlindsey@petrainc.net or apply in person at 1097 N. Rosario Street Meridian Idaho. To learn more about our company, visit us online at www.petrainc.net. Pre-employment drug test is required.

Aircraft Wire Harness Technician (Boise, ID)

2009-12-16T10:35:21-07:00
We have immediate openings for Aircraft/Avionics Wiring Techs!
To apply, please send your resume in response to this posting. This is a 6-week aviation project, with the potential to go long-term and/or extend in to other projects.
EOE.

Description:
Seeking Wiring Technicians with 1-2 years recent experience working on wire harnesses, preferably within the Corporate Aircraft industry. Qualified candidates will have proven teamwork abilities as well as experience in kitting, reading and following schematics/blueprints to fabricate wire harnesses, installation, line troubleshooting, and bench repair. Positive Team attitude and a willingness to exceed expectations is a must.

*1-2 years complex blueprints/schematics experience- reading, interpreting, following instructions
*Quickness and willingness to learn, technical aptitude
*Manual dexterity a must
*Previous aircraft wire harness experience a plus- fabrication/marking
*Flexibility in schedule availability- both day and/or swing shift
*Positive attitude, accountability, and desire to be intregal part of a close-knit, successful team.

Employment contingent on passing pre-employment drug screen and security background check.

Facility Maintenance/ Welder (Boise, Idaho)

2009-12-16T10:05:58-07:00
Facility Maintenance/Welder
Job Description: Seeking FT experienced maintenance personnel for large MFG. facility in Boise. MUST have strong welding skills. Day shift M-F. Pay $10-$12 DOE. Apply online at www.personnelinc.com, submit resume to pchase@personnel.com, then contact our office at 378-8700 to schedule your interview. Position to be filled immediately.

Semi-Trailer Mechanic/Welder (Boise, Idaho )

2009-12-16T10:05:36-07:00
Semi Trailer Mechanic/Welder
Job Description: Seeking FT skilled mechanic/welder(prefer exp.on semi-trailers/heavy equipment) Swing shift- work four 10 hour shifts M-Th 3:30pm-2am. Please submit resume to pchase@personnel.com & then apply online at www.personnelinc.com. Once application is submitted please contact our office at 378-8700 to schedule an interview. Position to be filled immediately.

Electronic Production (Meridian, ID)

2009-12-16T09:27:30-07:00
**Position offered through a staffing service. No fees apply.**

- Candidate must have computer knowledge.
- Put components on pcb's
- Attention to detail
- Must know Component ID and Polarities
- Must have 6 months to 1 year experience.

Shifts vary:
Days- Monday thru Friday 6:00am-2:30pm
Swings- Monday thru Friday 2:30pm-1:00am

AES, Inc
208-887-7740

Locksmith needed (Boise)

2009-12-16T08:48:52-07:00
Locksmith needed for outside service calls, MUST have experience, this is not a training position, must know late model automotive (making keys to cars and trucks,) and commercial and residential rekeing, must have own tools and truck, lots of work, paying good commision rate to the right person, must be available 24/7 to do all these calls, call A-1 LOCK & SAFE COMPANY 208-377-4500 ask for John

Fireplace Installer (Boise)

2009-12-15T09:24:37-07:00
Wanted - fireplace installer for zero clearance fireplaces with venting through the wall and through the roof. Must have experience. Please fax resume to (208)376-0185 or respond to spawholesalers@clearwire.net.

Needed Journey man Hands n Hardwood floor man!! AAAHARDWOOD

2009-12-13T07:41:52-07:00
We need a highly skilled team player for AAA. I need someone that is honest skilled and someone that cares about there work environment. This is a part time job due to the slow economy, but someone can build a great place for employment for themselves!! I need somebody that can run there own jobs and be the upmost of a pro. We have one of the best company's around and one of the oldest. this position does not just go to anybody. We are going to be very picky. Please E-mail your resume. Please no calls on this job. Thanks AAA

Electrician (Emmett)

2009-12-11T19:17:51-07:00
Looking for experienced electrician needing work or experienced electricians helper needed for a couple of days to rough in new house. - Experienced only please.
$10.00 per hour or $100.00 per day if you have your own tools.

WANTED FURNACE MAN TO PUT ELECTRIC FURNACE IN TRAILER (BOISE, ID)

2009-12-11T17:51:46-07:00
NEED FURNACE GUY TO INSTALL A ELECTRIC FURNACE IN A MOBILE HOME AND WOULD BE GREAT IF YOU HAD OR KNEW OF SOMEONE WHO HAD A GOOD, USED MOBILE HOME ELECTRIC FURNACE FOR SALE ALSO. CALL 388-8905 OR 703-9330

cell tower installers (northwest/us)

2009-12-11T12:00:39-07:00
install cell sites from the ground up 6 /12 plus hour days all out of town work gone for weeks at a time outside in the weather all day/drug tests required.atleast 2 months work maybe more. send resume

Sewing and Computerized Embroidery (Boise Downtown)

2009-12-11T09:48:57-07:00
After 18 years our seamstress is retiring! We are a small store established 70 years ago looking to fill a vacancy in our embroidery department with two part time people. We have one person hired for 25 hours a week and now need a second person for 15-20 hours per week to run our computerized multi-head embroidery machines and do regular sewing machine sewing. Must have excellent work history and have very good sewing skills. We will train to run the industrial embroidery machines. Call Ric at Nelson School Supply 344-1122

Machinist/ Shop Foreman (Boise, Idaho )

2009-12-11T08:48:29-07:00
Seeking Skilled Machinist/Shop Foreman for large Mfg. co. in Boise. Full time day shift. Must possess supervisory, administrative, and scheduling abilities. Salary $25-30K. Submit resume to pchase@personnel.com

HVAC technician (Nampa)

2009-12-10T15:22:39-07:00
Wanted: honest, hardworking, self starting individual.

Must have Idaho Journeyman licence or current apprenticeship card.

Must have clean driving record.

Call Dave 412-8690

Fax resume to 468-0039

Auto Tech needed (NAMPA)

2009-12-10T14:28:05-07:00
Expanding shop wants to hire a career tech who loves cars and is looking for a long-term position.
Job experience is required. Bonus program.

Please send an email of interest with your phone number included and we will contact you.
A resume or list of experience would be appreciated.

Journeyman HVAC Service Technician (Boise)

2009-12-10T12:16:20-07:00
Established Boise HVAC company is seeking a qualified Journeyman HVAC Service Technician.
Must be Idaho Journeyman HVAC Licensed ~ NATE Certified a plus ~ Other certifications a plus
Must have experience troubleshooting and repairing residential systems, commercial experience
a plus. Valid driver's license and good driving record also required.
If your looking for a comany that treats customers right and has great growth potential then
we want to hear from you. Please send your resume for immediatge consideration to asi@asihvacr.com

Carpenter Help (Treasure Valley)

2009-12-10T09:31:52-07:00
Help carpenters by performing duties of lesser skill. Duties include using, supplying or holding materials or tools, and cleaning work area and equipment.Need at least 2 years carpentry installing window, and hanging doors. Must be able to read and use tape measure. English needed to speak to employer. Driving and Criminal background must be clean. Great Company to work for $10.00 per hour to start. Resume required.
Apply @ 312 Caldwell Blvd.

Minimum Requirements:
18+ yrs of age
2 yrs exp
Pass background check
Pass DMV Report

Contractors, Residential Builders

2009-12-09T18:12:22-07:00
We Seek Independent Contractors/ Builders/ Business owners

ENTREPRENEURS !

Residential real estate experience preferred.

Buying, Selling, and fixing properties

801 930-9826

flexible hours

Full or Part time to start

Auto Service Tech / Lube Tech (Boise)

2009-12-09T10:18:18-07:00
Looking for an experienced Automotive Service Technician. Must be experienced in all aspects of vehicle service which includes oil changes in a quick lube environment,
Automatic Transmission fluid exchanges, Coolant Flushes, Gearbox changes, Fuel filter replacement, Tire rotations, etc.
Mechanic experience a plus. We offer a competitive wage, paid holidays / vacation and health /dental insurance.
Must be able to work weekends which includes Sunday.
Must have experience, great customer skills, and neat appearance.
This is a full time position for the right person.
Send qualifications and past job information in Word format, or PDF file with contact information to this job posting.

Tile Setter (Idaho/E.OR)

2009-12-08T13:25:01-07:00
Looking for experienced tile setters for new innovative product installations. Must have own tools, transportation, minimum of 5 yrs. experience and be reliable. Also must have liability insurance, workers compensation insurance and contractor registration.

Personal Trainer (Orchard Street)

2009-12-08T13:07:10-07:00
I have a fully equipped gym/personal training studio and am looking for high-quality trainers who already have a client base to join our team. You can make your own rates and your own schedule and work as much or as little as you would like. You just pay a monthly fee for access to the gym.

Please call Sherry with any questions
(208)869-1157

Glass Company (Treasure Valley)

2009-12-08T12:18:19-07:00
Franchise opportunity to purchase glass company serving the Treasure Valley. Unique service and glass replacement for residential and commercial buildings.
Please call Russ for more information 208-724-1459

Experienced Pressman Needed (Garden City)

2009-12-08T11:05:15-07:00
Print shop in Garden City is looking for an experienced Heidelberg GTO operator. We have a 4 color and a 1 color GTO. Both are running conventional dampners. Position is part-time to start. 5-6 hours a day. This could quickly turn into a full-time position. Any pre-press or bindery experience would be very helpful! Looking for a motivated individual who can think for themselves and enjoys a challenge. We print on a lot of different substrates and specialize in taking on the jobs other print shops can't handle. Please email your resume. Thanks!

Wanted - -Scooter mechanic (Eagle)

2009-12-07T14:12:17-07:00
I need someone to fix my 2005 Yamaha Zuma - - I think there is a problem with the electronic choke. Would like someone to come to the house. Reasonable rates only. Please e-mail me if you can help!

Thanks!

roofer wanted

2009-12-03T15:29:17-07:00
looking for piece work tools a must. experenced only. I am looking for roofing labor only. We are starting a roofing division and looking for roofers who have been doing roofing full time and have all the tools that they will need. Please reply with piece rate or wage. I have been getting alot of response. I will try to reply to all qualified applicatants. Please reply with piece rate and wage i will not reply to ant=yone wioth out this information. I am looking for labor, not companies. Roofing companies do not apply. Labor subcontractors are ok, but not nessary to have your own insurance.

Experienced Home Alarm Installer (Boise area)

2009-12-03T14:39:53-07:00
We're looking for an experienced, reliable, detail oriented home alarm installer. Must be capable of installing Honeywell, DSC and GE systems. If you've been in the business before you know how easy it is to install wireless. That's what we sell. The compensation listed is based on your skill level and what our existing techs make. We also reimburse you for mileage and expenses. If you are not willing to work hard please do not bother applying for this position.

Email your resume and we will contact you. **** IMPORTANT**** PLEASE PUT - "Home Alarm Installer (Idaho)" in the subject line. IF YOU DO NOT YOUR EMAIL MAY BE DELETED.

Contact us if you are looking for a long term, reliable position with a growing organization.

Instrumentation Techs - Heavy Industrial Experience (Vernal, UT )

2009-12-03T14:33:39-07:00
Need 2 Instrumentation Techs
Heavy Industrial Experience Only
Four years minimum instrumentation experience required including the knowledge to,

Calibrate instrumentation including

Pressure

Temperature

Flow

Ultrasonic level transmitters

LOTS OF OVERTIME! Working 60 to 72 hours per week.

Pay is $20 per hour, $30 for OT per hour. $72.25 daily per-diem.

Must be able to pass drug test.

Job is near Vernal, UT and will start next week and go thru at least the end of April.

Email me ASAP or call Dave at 520-331-3131

Machinist (Boise, ID)

2009-12-03T12:55:55-07:00
Our company is searching for a machinist with experience operating CNC mills.
Job requirements include being able to read prints, perform set-ups, g code programming and inspection capabilities.
The candidate must supply their own tools and be willing to adapt to a lean manufacturing team environment.
We are offering a competitive wage and benefits.

Marine Technician (McCall )

2009-12-03T10:18:19-07:00
Marine Technician wanted in McCall Idaho. Looking for a very cooperative, experienced, and hard working individual who has a solid background in I/O's, Outboard's and general mantainance, such as trailer wiring, stereo installation etc. 208-634-7007

Independent Voice and Data Contractor (All Idaho)

2009-12-03T06:07:39-07:00
Telecom tech needed to perform IW (inside wiring) work in commercial retail stores. This is a per hour as needed contract position. Most tickets only take 15-45 minutes on average to complete so they can be complete between other jobs. We will pay you a 2 hour minimum and reimbuse you for any materials used. You must be able to work without supervision, have dependable transportation, your own tools, and a minimum skill set (see below) to qualify.

All Techs should have a minimum skill set as follows:
� Cross Connect phone lines
� Tone lines
� Extend lines
� Trouble shoot voice and data wiring/dial tone issues
� Verify Dial tone
� Cabling in Commercial structures

Tools Needed:
� Punch Down Tool (110/66)
� Toner Set
� Crimp Tool (RJ45/RJ11)
� Butt Set (dial tone tester)
� Precision Screw Driver set
� Pair Tester
� Cutter
� 12 Volt (minimum drill)

If you are interested and meet the qualifications of this position please reply with your contact info, resume or skill set along with 2 to 3 references that may be contacted. Also include your coverage area

retiree/homemaker for sewing project (Boise and surrounding)

2009-12-02T14:36:55-07:00
I am looking for someone who just enjoys sewing and wants to make some extra cash for Christmas or ??? I am hoping to find a stay at home mom or retiree with some idle time on their hands in need of a project. I have a light cotton mens button up shirt that fits me perfectly. It is wearing out and I have been unable to find any more with the same fit/style. I am hoping to find a hobby/amateur seamstress with the ability to use the shirt as a guide and make a pattern for several new shirts. I have 2 shirts, so 1 could be "sacrificed" to make the pattern. I will go with you to help pick out and purchase all materials. Just please send me a rough quote on what it would cost to make the pattern and sew 1 shirt. Also a quote on any additional shirts. *Bonus for someone with one of those fancy machines that does custom needle work or designs, but not a requirement.

I dont have a clue about this stuff, so if it isnt possible or is too labor-intense and expensive please let me know.

Also, to avoid the usual Craigslist "bots" and scammers... Please put "custom sewing" in the subject line.

Thank you and Happy Holidays

Experienced Television Tech

2009-12-02T09:17:55-07:00
Looking For VERY Experienced Television/Audio tech. Digital analog and component level trouble shooting experience required. Excellent soldering a must. Must have resume.

Automotive Technician

2009-12-01T16:33:09-07:00
Automotive repair/tire shop looking for an energetic individual, good diagnostic skills, brakes, front ends, timing belts, alignments and general overall vehicle repair are a must. Individual will need to have a strong desire to be successful, which means strong vehicle inspections, ability to see add-ons sales. Must be able to work Saturdays. We are a drug free work place. Clean driving record required. Please send in a resume to be condsidered.

CCTV Sewer Camera/Combo Truck Operator (Idaho)

2009-12-01T15:52:55-07:00
WW and or collections license, experience a must.
Benefits, grow a business, work with a winning team.

1st and 2nd year electrical apprentice (boise)

2009-12-01T15:03:30-07:00
looking for 1st and 2nd year apprentices possible long term job must be registered with state .

Meineke Car Care Lube Technician (Boise )

2009-12-01T14:59:27-07:00
We are looking for a full time lube technician for our store located at 12367 W. Chinden Blvd. in Boise. Position includes all aspects of servicing our customers cars, including changing oil, rotating tires, and inspecting vehicles. Position is full time, and will pay $7.50+ depending on experience. Must have a valid drivers license, be great with customers, and willing to work weekends.
Stop by with your resume at our store between the hours of 8:00am and 10:00am, Monday � Saturday.

Regional Service Technicians (Boise, ID)

2009-12-01T12:51:52-07:00
I need a mechanically inclined individual who has the ability to repair fitness equipment and various other products locally in Boise, ID and surrounding areas. We pay per job, we allow our technicians to set their own schedule and consider this a part time opportunity. To be successful at this you will need reliable transportation, a computer with Internet access, ability to scan and email documents, your own tools, and great customer service skills. The right candidate will have a great mechanical aptitude, the ability to learn quickly as well as carry out over the phone instructions during a job, an individual that is timely, no felony convictions, responsible, with a neat appearance. Please respond to this posting if you feel your are the right person for the job.

Insulation Technician (Boise)

2009-11-30T15:29:00-07:00
Part time position for experienced insulation installer. Must be physically fit. Hours are from 8-5pm during the week as needed. Approximately 20 hours a week with potential for full time position with benefits.
Please submit resume with work history.
HVAC license is a plus.

EPDM/TPO Installer needed (Boise)

2009-11-30T11:35:59-07:00
EXPERIENCED EPDM/TPO installers needed. Resume and references required.

Journeyman Drywall Hangers (Treasure Valley)

2009-11-29T08:20:11-07:00
Hireing drywall hangers with a minuman of 5 yrs exp. in residentual.Hourly pay,must have own tools,transportation.Email me and please leave your exp. and phone# Thank you Dan

Plastering (Emmett)

2009-11-28T18:21:06-07:00
Looking for plastering company to lath, plaster 2000 sq. ft. house, new construction. Am looking to pay $4,500.00 to $5,000.00. If interested, please contact me for more info.

Power Generation Technician (Boise, ID)

2009-11-27T12:37:06-07:00
ALL APPLICATIONS MUST BE SUBMITTED ON-LINE THROUGH WWW.CUMMINSROCKYMOUNTAINJOBS.COM
Please do NOT contact emlpoyer. Thank you

This position involves frequent customer contact throughout the process of initiating, troubleshooting and completing power generation repairs in the field. All locations offer clean, safe working conditions, however, you may be working in situations where hazardous and potentially lethal electrical energy may be present. Therefore, a detailed knowledge of engines, generators and load transfer equipment is a must as well as a demonstrated proficiency in troubleshooting and repair of equipment using standard safety procedures.

The ideal candidate will have a high school diploma or GED. The candidate must have a minimum of 2 years of hands on experience or be a graduate of an accredited diesel school. Must have a detailed knowledge of engine/generator sets, gas and diesel engines, and auxiliary support equipment. In addition, the candidate must have a detailed knowledge of automatic transfer switches and be able to use control schematics and wiring diagrams to troubleshoot and repair genset and transfer switch controls. The job locations will frequently require travel both in and out of state. The candidate will be required to attend Onan Factory Schools for training on Onan equipment to get and maintain factory certification. In addition, the ideal candidate must be a motivated individual with good communication skills, both written and verbal, who can work unassisted. Will be required periodically to answer after hours and weekend emergency service calls. Must have a complete set of tools and have a valid driver's license with the ability to obtain a CDL.

Cummins Rocky Mountain LLC is an affirmative action, equal opportunity employer. We do not discriminate against applicants or employees on the basis of age, race, sex, color, religion, veteran status, national origin, disability or any other status protected by state or local law. It is Cummins Rocky Mountain's intention that all qualified applicants are given equal opportunity and that selection decisions be based on job-related factors.

Window Tinter (Boise)

2009-11-25T14:40:18-07:00
Looking for an experienced automotive window tinter. Must have verifiable work experience. Must have own tools. Please e-mail phone number and a short outline of your work experience/resume.

Experienced Quality Control Managers (Great Falls, MT)

2009-11-25T12:51:33-07:00
JOB SUMMARY: Immediate openings for Experienced Quality Control Managers and/or Quality Control Supervisors on Federal Projects. This position will require specific past performance and references as an approved QC manager/supervisor on one or more Federal Contracts. Several positions open ranging from single project QC manager onsite, to Corporate QC Manager overseeing multiple QC Managers across broad geographic area.

This position has overall responsibility for reporting directly to Corporate Management and the Client and verification that we meet all quality standards on our projects. The Quality Control Manager plans, coordinates, and oversees implementation of DPS�s / CGC's quality control and quality assurance programs. This position also reviews and amends DPS�s/ CGC's corporate Quality Plan to keep it current and to ensure compliance in all respects with established standards, methods and specifications.

SUPERVISORY RESPONSIBILITIES:
Depending on size, complexity and number of simultaneously jobs, this position supervises project Quality Control Supervisors and Quality Control Inspectors.

QUALIFICATIONS:
To successfully perform this job, this position must perform all duties and responsibilities accurately and satisfactorily while complying with specific deadlines. The qualifications listed below are representative of the knowledge, skills, and/or abilities required to satisfactorily perform this job.

EDUCATION and EXPERIENCE
�4 year degree in Construction Management College, Architecture or Civil Enginerring.
�Minimum 5 years supervisory experience as construction Quality Control Manager .
�Experience with Government Contracting is preferred.

COMPUTER SKILLS
�Must have working knowledge of computers and strong proficiency in Microsoft Word, Excel, Outlook and Windows XP.

REASONING ABILITY
�Ability to define problems collects data, establish facts, and draw valid conclusions.
�Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
�Strong ability to reason with client�s corporate quality assurance personnel and technical experts, and field quality assurance, technical authorities and construction supervisory representatives.

**Relocation fees not available.

EOE AAP M/F/V/D

Apply On-line @ WWW.DOYON.COM and refer to job # 09-017 2
or send resume to WWW.DGGHR@DOYON.COM

Experienced in Landscape Maintenance? (Treasure Valley)

2009-11-25T10:29:07-07:00
Thriving, local landscape maintenance company is looking for experienced, motivated persons to fill multiple leadership positions! We are a full service company performing all types of maintenance, including lawn and tree fertilization, lawn mowing, pruning, sprinkler work, and snow/ice removal.

2 years experience, valid driver's license, and strong English skills are required. Preferrence will be given to applicants with sprinkler experience, arborist certifications, and/or Dept. of Ag Applicators licenses. We are looking to hire NOW for the 2010 season!!! Salary depends on experience and certifications. Come be part of a growing team!

Maintenance Supervisor (Treasure Valley)

2009-11-24T14:18:26-07:00
Hiring for an experienced maintenance supervisor for the following job description:

Landscaping � All general landscaping and upkeep of lawns, trees & shrubs, sprinkler repair and upkeep. Upkeep and repair of landscaping tools, mowers, and trimmers.
Snow removal � Upkeep of all walkways and driveways to be kept clear of snow and ice. If necessary removal of snow from rooftops.
Appliances � Upkeep and repair of facilities dishwashers, washing machines, dryers, stovetops, ovens, microwaves, and security systems.
HVAC � General maintenance and upkeep of the facilities air conditioners and heating units. Ensuring that all filters are kept clean and replaced on a timely basis. Keeping all the units clean and in good appearance.
Basic Home Repair � This includes but not limited to: painting, touch ups, replacing lighting and fans, flooring repairs, and any other tasks that ensure that the facility looks its best.
Renovations � If expertise allows: roof replacement, remodels, floor replacement, installation of security systems, expansions, landscaping including installation of sprinkler systems.

Roofer - Journey Level (Monterey, CA)

2009-11-24T07:07:09-07:00
Looking for dependable, detaliled orientented, highly experienced Journey level Roofers, Clean DMV required. Looking for the very best!
Email your Name, phone number and your work experience with past employers names. Experienced Roofers only apply.

Project Superintendent (Spring Creek Manor)

2009-11-23T16:42:54-07:00
Experienced commercial project superintendent needed for assisted living building remodel. Contractor must be capable of negotiating and writing contracts. Facilitating and managing the bidding process. Orchestrate project management and construction administration duties. Contractor must be capable of performing demolition, finish carpentry, clean up and other hands on duties. Superintendent must be licensed and carry workers compensation and liability insurance. Skilled contractors who meet the above criteria are encouraged to submit his/her resume.

Semiconductor Equipment Engineer or Technician - Amat (Seattle WA)

2009-11-23T16:40:22-07:00
Established Semiconductor Equipment refurbisher in Seattle area is seeking engineers and technicians with experience in Applied Materials PVD, CVD, Etch, RTP, EPI equipment, Novellus CVD equipment, and Lam Research equipment.

We are looking for

� 5+ yrs equipment experience

� Equipment refurbishment experience +

� Project managing experience +

� Attention to detail

� Strong trouble shoot ability and experience

� �CAN DO� attitude

� Ability to work alone on final testing

� Ability to work alone on start up (Tier I, Tier II)

� Ability to work alone at customer�s site with a high degree of professionalism

� Travel domestic and international with short notices

Interest party, please contact eding@hdpac.com

Automotive Stereo Installer (Boise)

2009-11-23T11:55:18-07:00
Automotive customizing shop looking for an installer that has verifiable work experience. Need to be able to install stereos, alarms/remote starts, DVD systems and other auto multi media. Please only reply if you have performed this type of work in a professional work setting. No hobbyists please...Please e-mail resume.

carpet installer and repers (boise)

2009-11-23T08:17:33-07:00
I am locking for an exp person 2 install carpets and repers stears
get back 2 me w prise rate and exp
call me 559 1673

Plumber (Boise ID)

2009-11-20T11:46:49-07:00
Commercial plumbing shop looking for skilled Journeyman and apprentice plumbers. Upcomming project to start around the end of December.
Responseable and reliable applicants only.
Must have current Idaho journeyman or apprentice card.

Landscape Construction Foreman (Treasure Valley)

2009-11-19T21:13:31-07:00
3 years minimum experience as foreman of commercial and residential landscape construction

Primarily local work

Knowledge of irrigation pump systems required

References required

Email resume in reply to this posting

Experienced Wrought Iron Fabricator/Welder (Boise, ID)

2009-11-19T12:39:45-07:00
Job Description Summary: Fabricating and installing necessary metal work, such as railings fence and gates. Other tasks as necessary.

Performs all jobs safely.

Performs diversified duties fabricating, installing, delivering, loading etc.
Basic Qualifications: High School Diploma, or equivalent

5 years relevant job experience.

2 years fabricating wrought iron experience.

Basic blueprint and specification knowledge.

Great welding skills, MIG and TIG.

Ability to fabricate using provided drawings, follows detailed instructions and build to necessary specification. This position requires great fabrication skills, not only welding skills. Expert skills in reading tape measure and math skills are essential to perform needed tasks.

Stainless welding a plus

Excellent communication skills.

Drivers License is a plus

Self-motivated/Team Skills: self-directed, interacts well with others, multiple task management follows instructions, able to check one�s work.

Travel Required: Local travel may be required.

Hours of Operation

Mon � Thu.
6am -4:30Pm (hours may change during winter months)

We are EOE!

Upfitter Technician (Nampa, ID)
Need technician able to upfit existing and new service bodies, cranes bodies, flatbeds, etc. Must be have experience in welding, hydraulics, electrical systems, and read prints. Requires own tools.

Hours: Mon-Thur 4/10's

Painting Contractor Estimator (Boise)
This position requires a people person with skills already proven in the Painting Industry field. We specialize in commercial and industrial coatings. Familiarity with isqft.com is a plus. Please send your resume or call.
Adam @ 208-941-7420
adam@adamroepaint.com